You are here: > {qesy:here}

Trades news

A thousand miles begins with a single step remember not to get the tyres to work sick
2014-12-23 21:50:32
The car is a whole, the whole tyre is the only contact with the ground part, it's a little bad working conditions, wind and rain the sun is its commonplace, but it is such a hard working was "hit" at the foot of the small and the indispensable role played by the male lead has a decisive position in the car's life.
A good tyre will give you a sense of security, it will give you driving comfort, improve vehicle handling performance, increase fuel economy. . . See the benefits of this series, you should not treat it right?
Here I invite you to take a minute to look at, what kind of tyre care.
tyre pressure for each car manufacturer has special requirements, please follow the vehicle fuel tank cap or door on the inside label. Some tyre sidewall marked the highest inflation pressure, do not exceed the maximum value.
tyre pressure will change with temperature change, the temperature liter / drop 10 ℃, pressure also will rise / fall 0.07-0.14 kg / cm; pressure must be measured when the tyre is cooled, and after measuring the valve cap must Okay.
Please use the barometer to measure air pressure often develop the habit, not to judge with the naked eye. Sometimes a lot of pressure to run away, but did not quite seem deflated tyre. Pressure should be checked at least once a month (including the spare), spare tyre air pressure to charge relatively higher, run away to avoid falling.
Before highway driving, be sure to ensure proper air pressure; usually during highway driving, the tyre pressure should be increased by 10% in order to reduce the heat generated due to flex, thereby enhancing driving safety.
Two tyres on the same axle should be exactly the same pattern specifications, and should charge the same pressure, otherwise it will affect the vehicle ride and handling.
Insufficient tyre pressure can cause tyres to overheat. Low uneven ground area of the tyre tread or ply delamination, cracking the tread grooves and shoulder, broken cords, shoulder wear parts quickly, shorten tyre life; increasing bead and the rim of the abnormal friction between the bead damage caused, or tyre and rim out, even a flat tyre; at the same time will increase rolling resistance, increased fuel consumption, but also affect the handling of the vehicle, and even lead to serious accidents.
Pressure is too high so that the body weight is concentrated in the center of the tread, resulting in rapid wear of the tread center. When affected by external shocks, prone to injury and even blasting tread; the tension is too large, resulting in the tread and tread ditch delamination crack; tyre grip is reduced, reducing the braking performance; vehicle beat, reduced comfort, vehicle suspension systems easily damaged.
Found 20% lower than the standard tyre pressure, temporary qi can only be a last resort in case of an emergency cushion of dollars, can not fundamentally solve the problem, we must go to the nearest tyre shop as soon as the tyres removed, checked by a professional.
A small tyre puncture, if not in time will eventually lead to casualties. Check frequently for the existence of the entyre carcass nails, iron, glass shards, stones and other hard objects piercing, or other bruises, these potential hazards are likely to lead to a flat tyre.
Conservation does not tyre trouble, as long as you pay a little bit of thought to it, it will use its whole life to work for you. Finally had to emphasize - tyre is very important!